Before submitting us your DWGs, please double-check the following:

2D Objects

       2D elements should have no Z Height

       2D elements should only consist of lines, circles, arcs, points, and text.

       2D elements should not include nested blocks, faces, splines, or ellipses.

3D Objects

       3D Elements should not include, polyline regions, text, attributes, xref data, axis entities,     ellipses, circles, lines, or arcs

       3D Elements should be simplified removing unnecessary items such as screws, screw holes, dowel holes, nails, etc. The outer visible shell is most often all that is needed.

       3D drawing should be less than 7 mb per file. If larger files are need for very large equipment, please check with your CET MHL Library rep.

General Guidelines

       Ensure the 0 Layer is empty

       Unused Layers should be purged from the drawing

       All Layers should be thawed and unlocked

       Use the POINT command to add nodes/snapping points to symbols.

        Insertion and base point of the object should be set at (0,0,0)

 
Submit 2D/3D DWG Files

Please submit the completed DWG files over using this link to “Configura's Developer Support portal “ for review and publication testing. We'll notify you of any updates or changes required. If catalogues are already published elsewhere, please share the enterprise/catalogue codes.