Migration changes on extension
Please check with your developers if they have done the migration changes on the extensions before you start testing.
From Patch 1 all the COM materials that were saved in auxiliary will now properly save/transfer with the drawing. This will introduce a file increase for the extra resources. The changes will affect drawings saved on patch1 and later. COM materials will still be missing in the older drawing until it is reapplied in patch 1 or later patch.
1. Load a drawing with COM material missing in 10.5 or older version.
2. Reapply the COM materials.
3. Save and reload the drawing.
Expected: The COM materials should be loaded correctly with patch 1 now.
There is a general update to part tag in the core.
Test by loading drawings containing part tag, blocks, filter and visibility. Check that all the settings are retained properly.